Search found 213 matches

 Return to the advanced search

Re: Great service!

 by AJ Quick ¦  Tue Dec 10, 2013 2:12 pm ¦  Forum: Feedback ¦  Topic: Great service! ¦  Replies: 1 ¦  Views: 27066

Glad to hear!

Re: How to Test movements of X Y Z axis

 by AJ Quick ¦  Tue Nov 26, 2013 3:13 pm ¦  Forum: CNC Software ¦  Topic: How to Test movements of X Y Z axis ¦  Replies: 1 ¦  Views: 15781

What controller do you have?

Did you setup the pins in Mach3?

Check out our Mach3 tutorial: http://www.aquickcnc.com/tutorials/mach3/

Re: limit and homing switches

 by AJ Quick ¦  Mon Nov 25, 2013 12:30 am ¦  Forum: Electronics ¦  Topic: limit and homing switches ¦  Replies: 3 ¦  Views: 17634

I don't. But if using Normally Closed switches, you just have to wire them in series. That is take a wire from the board to one pin of the switch, connect the other pin of the switch to the next switch and so on, and then connect the last wire back to the main board. This is a drawing I found on Lin...

Re: limit and homing switches

 by AJ Quick ¦  Wed Nov 20, 2013 6:45 pm ¦  Forum: Electronics ¦  Topic: limit and homing switches ¦  Replies: 3 ¦  Views: 17634

You won't need the capacitor I don't think. (Is there any reason to have one)? What you should probably use though is 6 NC (normally closed) switches that open when one of them is pressed. You can then wire them up in series between your homing input and the ground. Setup Mach3/4 to the port of the ...

Re: CNC Machine delivery

 by AJ Quick ¦  Wed Oct 30, 2013 12:03 am ¦  Forum: Feedback ¦  Topic: CNC Machine delivery ¦  Replies: 2 ¦  Views: 16612

And we've received no response from Ian since he made these posts...

Re: Hardware Kit

 by AJ Quick ¦  Tue Oct 29, 2013 11:59 pm ¦  Forum: CNC Building Blocks ¦  Topic: Hardware Kit ¦  Replies: 25 ¦  Views: 49321

We will be spending all of November and December to work on finalizing our new kits that use the Building Blocks setup. Hopefully with a new Kickstarter for a whole brand new kit!

Re: My design

 by AJ Quick ¦  Fri Sep 27, 2013 5:21 pm ¦  Forum: CNC Building Blocks ¦  Topic: My design ¦  Replies: 22 ¦  Views: 47745

Its ok. Think of all the time you will save by having a machine that makes stuff for you!

Re: My design

 by AJ Quick ¦  Thu Sep 26, 2013 12:17 pm ¦  Forum: CNC Building Blocks ¦  Topic: My design ¦  Replies: 22 ¦  Views: 47745

This is coming along great.

Any chance you can get a digital camera to take a few good pics when its done? We'd love to share the design with all of our followers!

Re: Delivery of CNC Quick Cut

 by AJ Quick ¦  Fri Jul 12, 2013 12:14 pm ¦  Forum: Kickstarter CNC ¦  Topic: Delivery of CNC Quick Cut ¦  Replies: 1 ¦  Views: 17997

Ian. Your last message to us was in October 2011. And we replied to that. You sent us an email on June 30th 2013, and we replied on July 1st 2013. No other messages have been received. Please forward all emails you sent to us via Private Message so we can get to the bottom of this communication issue.

Re: How to connect 8 wire unipolar motors to the controller

 by AJ Quick ¦  Fri Jul 12, 2013 12:10 pm ¦  Forum: Electronics ¦  Topic: How to connect 8 wire unipolar motors to the controller ¦  Replies: 2 ¦  Views: 17088

Those are some unusual motors.

Seems like this wiring would be correct:

A+: Red
A-: Black
B+: White
B-: Green
COM: Yellow, Blue, Orange, Brown

  • 1
  • 3
  • 4
  • 5
  • 6
  • 7
  • 22

Steve, Thanks for letting us know. I believe the[…]

What are your DIP switches set to? They can cause […]

CNC electronic questions?

AJ, Thanks a lot for your help,

Testing the 3 Axis Controller

I had replied to your email, but I'll post this he[…]